|
Product Details:
|
| Name: | Building Material Galvanized Steel Decking Floor Roll Forming Machine/Floor Deck | Condition: | New |
|---|---|---|---|
| New: | Colored Glaze Steel | Use: | Roof And Wall Or Any |
| Certification: | CE/ISO9001 | Control System: | PLC(imported Brand) |
| Tile Type: | Colored Glaze Steel | ||
| High Light: | ISO9001 deck floor roll forming machine,ISO9001 floor decking machine,Building Material floor deck forming machine |
||
Building Material Galvanized Steel Decking Floor Roll Forming Machine/Floor Deck
Features for floor deck roll forming machine
1.Low cost, light weight but high strength, short building period, and re-cycle use
2.Save material , no waste.
3.Easy operation, low maintenance cost
4.Hydraulic drive 37kw, the speed can reach 20 meters per minute.
5.28 steps to form
The metal deck produced by floor decking roll forming line has high strength with big wave length. It adheres well to concrete. Used on high building, it not only saves steel mold plate, but also reduces the weight of storey. With the same bearing capacity, it economized steel and cuts down investment accordingly.
We can also supply the customized machines
| No. | item | Parameter(all is subject to our final design) | |
|
1
|
Suitable raw material | Type | Common galvanized & pre-painted steel |
| Yield strength | 235MPa(or other high strength steel) | ||
| Thickness(mm) | 0.4-0.7 | ||
| width(mm) | According to final design | ||
| 2 | Manual uncoiler’s capacity | Max.5tons | |
| 3 | Forming speed(m/min) | About 18-20m/min | |
| 4 | Main motor power(KW) | 5.5kw | |
| 5 | Hydraulic power(KW) | 3kw | |
| 6 | Forming roller groups | Around 19-20 groups | |
| 7 | Raw material of forming roller | High quality No.45 steel | |
| 8 | Raw material of cutting blade | Cr12mould steel with quenched treatment | |
| 9 | controlling system | Mitsubishi PLC& converter | |
| 10 | Suitable industrial voltage | According to your special requirement | |
| 11 | Machine weight | About 6.2tons | |
Machine’s Components
| 1 | 5 tons manual uncoiler with new brake design | 1set |
| 2 | Coil sheet guiding and adjust department | 1set |
| 3 | File covered department(optional) | 1set |
| 4 | Main roll forming systerm | 1set |
| 5 | Hydraulic cutting department | 1set |
| 6 | Hydraulic station | 1set |
| 7 | PLC control table | 1set |
| 8 | Final product runout table |
1set |
Before loading to the container, we will check the machine first
Second, make some protection on the machine, Such as, we will mpaint the coil on the roller and shaft, in case the roller and shast got corrosion and rusty during long time delivery
Third, we will make the plastic package on the easy damage parts, and fix all the parts into container by the steel wire rope, and ensure the machine will not damage when shaking on sea.
At last, we will take photos for customer when loading to container
Contact Person: Arno Hao
Tel: +8618717894416
