|
Product Details:
|
| Name: | Portable Roll Forming Metal Roof Machines Standing Seam Roof Panel Machine | The Shaft: | 70mm |
|---|---|---|---|
| Cutting Blade Material: | Cr12 | Screen: | Color Touch Screen |
| Bottom Frame: | 350H Steel | Control System: | PLC |
| Raw Material: | PPGI,GI,AL | Condition: | New |
| Usage: | Roof Buliding | Laoding Port: | Tianjin |
| High Light: | roofing sheet making machine,metal sheet roof roll forming machine |
||
Portable Roll Forming Metal Roof Machines Standing Seam Roof Panel Machine
1. About this machine:
Metal roof panel is a cost-effective architectural metal roofing system with concealed clips and fasteners, it requires no mechanical seaming or separate seam cap. The narrow standing seam metal roof panel can be notched and bent to provide a smooth transition from roof to fascia or mansard. Knee caps are applied over the notched seams to create visual continuity..
2. Machine details:
|
DECOILER |
|
ROLL FORMING MACHINE (2) NO. of roller Stations: 16groups (5) Diameter of shaft: 70mm |
|
CUT-OFF DEVICE (1) Material for Cut-Off Modular: Cr12 steel after treatment (5) Machine can adjust siez, and produce different raw material width |
|
PLC CONTROL BOX (4) Length Error: ±2mm (5) Language: English and Chinese (6) Voltage: 380v/50HZ, 3Phase (it depends on customer requirement) |
|
HYDRAULIC PUMP STATION (1) Motor power: 3 kw |
|
PRODUCTION SUPPORT TABLE (1) No power type |
3. Main patermeters:
| Dimension | 6000*1700*1600mm |
| Weight | about 6500KGS |
| Voltage of Motor | 380V/50HZ/3PH or depend on customer |
| Main Motor Power for Running | 7.5KW |
| Hydraulic Power for Cutting | 3KW |
| Forming Steps | 13Steps rollers |
| Working Speed | 0-15m/min |
| Height of Roofing | 65mm |
| Effective Cover Width | 300,400mm,425mm,500mm |
| Feeding Material Width | 475,575-578mm, 600-603mm |
| Thickness for Al Sheet | 0.7-1.1mm |
| Thickness for Steel Sheet | 0.7-1.0mm |
| Min. Width of Tapered Roofing | 250mm |
| Min. Length of Tapered Roofing | 1000mm |
| Cutting, Forming Tolerance | ±2mm |
| Roller material |
45# steel with machining----Fine Machining ---Polishing---Plated Chrome---Polishing; |
| Material of shaft | High grade 45# forged steel |
| Shaft Diameter | 70mm |
| No | Items | Quantity | Remarks | |
| 1 | Manual/Hydraulic Uncoiler | 1set | Up to customer | |
| 2 | Main forming machine | Pre-cutting device | 1set | Up to customer |
| Feeding device | 1set | |||
| Hydraulic system | 1set | |||
| Roll forming system | 1set | |||
| Post cutting device | 1set | |||
| Protective cover | 1set | Up to customer | ||
| 3 | PLC control system with touch screen | 1set | ||
| 4 | Run out table | 1set | Up to customer | |
5. Packing
Standard Export Packing.
1). One 40ft container for loading one set machine with manual decoiler;
2). The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3). Spare parts and some small parts packed in plastic tooling box;
4). All Components Fixed by steel wire with Container.
6. Installation and Training:
① If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
② Without visiting, we will send you user manual and video to teach you to install and operate.
③ If buyer needs our technician to go to your local factory,please arrange board and lodging and other necessary things.
We can produce according to your requirements.
Machine Photos:
Contact Person: Mr. Arno Hao
Tel: +8618717894416
